Selasa, 27 September 2011
di
19.26
|
0
komentar
The cajón was most likely developed in coastal Peru during the early 19th century or before.The instrument reached a peak in popularity by 1850, and by the end of the 19th century cajón players were experimenting with the design of the instrument by bending some of the planks in the cajón's body to alter the instrument's patterns of sound vibration.
Half to three quarter inch (1.3 to 2 cm) thick wood is generally used for five sides of the box. A thin sheet of plywood is nailed on as the sixth side and acts as the striking surface or head. A sound hole is cut on the back side opposite the head or tapa.
The top edges are often left unattached and can be slapped against the box. The player sits astride the box, tilting it at an angle while striking the head between his knees. The modern cajón has several screws at the top for adjusting percussive timbre and may sport rubber feet. Some versions may also have several vertically stretched cords pressed against the tapa for a buzz like effect or tone. Guitar strings, rattles or drum snares may serve this purpose. The percussionist can play the sides with the top of his palms and fingers for additional sounds. There are also tube cajón, which are played like a conga.
Diposting oleh
G n A Production
Label:
Sekilas Info